CNC Cutting Services — Loveland, Ohio
Precise parts.
Published prices.
No guesswork.
Sheet processing, MDF door and drawer face cutting, edge banding, and custom profiles — run on a 5×10 CNC router in our Loveland shop. Bring your Mozaik files or your drawings. We’ll cut the parts; you build the project.
01 — Published Pricing
No mystery quotes.
This is the menu.
Sheet Processing
From $75 / sheet
Plywood, MDF, and melamine cut to your files, labeled and stacked in assembly order.
File Conversion
$150 / hr
We run Mozaik natively. DXF, SVG, or other formats handled at $150/hr — confirmed in writing before we start.
MDF Doors & Drawer Faces
Quoted per job
Flat MDF doors and drawer faces cut to spec. Profiles and edge details quoted per job.
Custom Profiles
Quoted per job
Unusual geometry, contoured edges, or complex programs quoted individually. Send the drawing.
All sheet sizes & prices — $75 to $150
| Sheet Size | Nominal | Price per Sheet |
|---|---|---|
| 4×8 | 48″ × 96″ | $75 |
| 4×10 | 48″ × 120″ | $100 |
| 5×8 | 60″ × 96″ | $100 |
| 5×9 | 60″ × 108″ | $110 |
| 5×10 | 60″ × 120″ | $125 |
| 5×12 | 60″ × 144″ | $150 |
Sizes outside this list quoted on request. We price the job, not the sheet — a normal mix evens out. Jobs weighted toward long or complex programs may carry a surcharge, shown in your written quote before we cut.
Edge Banding — Quoted per job
Edge banding is available as an add-on service. Pricing depends on linear footage, tape thickness, and profile. Request a quote when you submit your files.
02 — Material
Bring yours or use ours.
Customer-Supplied
We accept customer-supplied material. Drop it off when you book your cut so the floor is clear and someone is available to receive it. We inspect material at intake and flag anything off before we cut — material behavior after that point remains your risk.
Shop-Supplied
We sell and supply standard sheet goods — plywood, MDF, and melamine. Send your cut list and we’ll price material alongside machine time, staged and ready when your job runs. Custom panel layups available on request.
03 — How It Works
Three steps, no chasing.
Step 01
Send your files
Mozaik files run natively. Have drawings or another format? We’ll confirm conversion scope and cost before anything runs.
Step 02
Confirm price and date
You get the sheet count, the price from the menu, and your completion date — in writing, before we cut.
Step 03
Pick up finished parts
Cut, labeled, and stacked in assembly order. Ready for your shop or your site.
04 — Turnaround
Seven-day standard.
Expedited when the schedule allows.
Standard turnaround is seven business days from file approval and job confirmation. Expedited turnaround is available subject to machine availability — ask when you book. Rush jobs carry an upcharge confirmed in your written quote.
05 — Remakes
If a part comes out wrong.
- Work that doesn’t match your released cut files is remade at our cost — labor and material — when reported within 5 business days of pickup and before parts are assembled, finished, or installed.
- Remedy is recutting or re-banding the affected parts at our shop. Costs beyond the parts are not covered, and our total liability is the amount invoiced for the affected work — our price, not the value of your sale to your customer.
- Work that matches the release but needs changing bills at standard rates.
- Customer-supplied material is cut as received. We check count and size at intake and report anything that looks or feels off, but material behavior — moisture, warp, voids — remains your risk. Recuts from material defects bill at standard rates.
- Where fault is genuinely unclear, we cover the labor and you cover the material.
Get your parts
on the schedule.
Email your files or call the shop. We’ll confirm price and turnaround the same day.
Need full cabinetry or millwork instead?
Request a project inquiry →
Phone
Location
Loveland, OH — serving Cincinnati,
Northern Kentucky & beyond